HYCOOX

The user interface of HYCOOX is state of the art and user friendly. The user can adjust the settings such as; injection mode, procedure type, syringe size (1cc, 3cc, 5cc and 10cc), total injection shots, injection speed level, viscosity level, skin type (suction level) and repeat injection speed. 

Injection Mode: 
1) Auto Sensing
    Auto sensing mode is operated with HYCOOX’s multi suction system with 9-pin multi needle. Auto sensing mode is for hydro lifting, cocktail therapy and meso-therapy procedure. Solution is injected automatically by the suction system without touching any buttons or foot switch.

2) Rhythm Injection Mode (Suction function is deactivated)

    On Rhythm Injection Mode, suction function is deactivated. This mode is for scalp and lipo procedures with a single or 5-pin multi needle that suction function is not required. In order to inject the solution, the foot switch has to be pressed.

3) Manual Shot Mode (Suction function is activated)

    On Manual Shot Mode, 9-pin multi needle is used for injection. Not like auto sensing mode, the device doesn’t inject the solution even the needle is inserted into the skin. The user needs to press the foot switch, then the solution is injected. The mode is for Hydro lifting, cocktail therapy and meso-therapy procedure and the mode is for sensitive point’s procedure.

Procedure Type:
On Procedure Mode, there are 8 types for procedure setting mode. The purpose of Procedure mode is to divide the amount of solution the user wants to inject. The range is from 10 to 320 and the user can divide the solution amount from 10to 320 times.

The range number on each mode is recommended range from the dermatologists.

If user uses 10ml drug and set 120 on Hydro mode as above, the 10ml drug is divided by120 times and the user can inject 120 times into the skin.

Syringe Size

HYCOOX supports all 6 kinds of syringes which are “1cc, Glass 1cc,3cc, Glass 3cc, 5cc and 10cc”.

Speed Level
Injection speed of solutions can be controlled with “Speed Level”.As number is higher, the injection speed of solutions shall be faster.

The speed level of injection plays an important role of pain from the injection. If the injection speed is too fast, the client might feel the solution pain, then adjust the injection speed to 1 or 2 to reduce the pain of the solution.

Viscosity Level
Each solution has a different viscosity. There is lots of pressure inside of the syringe after injection. Thus, if the syringe is not released, the solution leakage can be occurred due to the pressure. Thus, the “Viscosity Level” should be set as 4 or 5 to prevent the leakage of solutions.

Repeat Injection Speed
The user can control the interval time from shot to shot. If the user gets used to HYCOOX, please set the “Repeat Injection Speed” as 3 or 4, and for the beginner we recommend to set as level 7.

Procedure time shall be faster as the user gets used to HYCOOX.